Window Insulation for Winter, 62''x42''-9PCS Window Insulation Kit, Window Plastic for Winterizing, Clear

Window Insulation for Winter, 62''x42''-9PCS Window Insulation Kit, Window Plastic for Winterizing, Clear

Nicht auf Lager
USA Vom USA Store für Sie importiert
Unsere besten Logistigpartner
  • fedex
  • dhl
U-Care-Garantie:
Keine
Wählen Sie einen Plan aus
fast shipping

Fast
Shipping

free return

Kostenlose
Rücksendung*

Sichere Verpackung

Sichere Verpackung

100 % Originalprodukte

100 % Originalprodukte

pci-dss

PCI DSS-Standards

iso certified

ISO 27001-zertifiziert


paypal payment
visa payment
mastercard payment
Note: Step Down Voltage Transformer required for using electronics products of USA store (110-120). Recommended power converters Jetzt kaufen.

Produktdetails

Shop Window Insulation for Winter, 62''x42'9PCS Window Insulation Kit, Window Plastic for Winterizing, Clear online at a best price in Liechtenstein. B0FTF8VB9R
Brand NameFTLKIBMD
ManufacturerFTLKIBMD
Number of Items9
Included ComponentsDouble Sided Fabric Tape, Window Plastic for Winterizing
Item Weight1.1 pounds (500 grams)
Model NumberWIK042
Manufacturer Part NumberWIK4262-9
Item Thickness0.3 millimeters
Item Dimensions L x W62"L x 42"W (157.5 x 106.7 cm)
Coverage24192 square inches
Material TypePlastic
Recommended Uses For ProductInstructions for Installing Window Insulation Plastic Film 1. Measure the window frame accurately: Use a tape measure to get precise width and height of the window frame (focus on areas where tape will be applied). Cut the plastic film: Cut it to match the window dimensions, and itu2019s recommended to make the film about 1 inch larger in both width and height for easy alignment and adhesion. 2. Prepare the frame for tape: Wipe the frame areas (where double-sided tape will go) with a clean, dry cloth to remove dust/debris. Apply the tape along the frameu2019s entire perimeter. Then peel off only the four corners (top-left, top-right, bottom-left, bottom-right) of the tapeu2019s outer lineru2014do not peel off the whole liner. 3. Attach from the top-left corner: Align the filmu2019s top-left corner with the frameu2019s top-left corner (where the tape liner is peeled). Press the film onto the exposed tape. 4. Pull the film taut horizontally to the top-right corner (ensure no wrinkles), then press the film there. Once aligned, peel off the remaining outer liner from the top edgeu2019s tape and press the film firmly to stick fully. 5. Secure the left edge: From the attached top-left corner, pull the film taut vertically down to the frameu2019s bottom-left corner. Check for wrinkles, adjust, then press the film there. Peel off the remaining outer liner from the left edgeu2019s tape and press the film firmly to secure it. 6. Secure the right and bottom edges: Start at the attached bottom-left corner, pull the film taut horizontally to the bottom-right corner. Confirm no wrinkles, then press the film there. Peel off the remaining outer liner from the right and bottom edgesu2019 tape. Press the film firmly along these edges for full adhesion. 7. Trim excess film: Use a utility knife or sharp scissors to cut off excess film beyond the frame. Cut along the frame edge for a neat finish.
MaterialPlastic
BrandFTLKIBMD
Recommended Uses For ProductInstructions for Installing Window Insulation Plastic Film 1. Measure the window frame accurately: Use a tape measure to get precise width and height of the window frame (focus on areas where tape will be applied). Cut the plastic film: Cut it to match the window dimensions, and itu2019s recommended to make the film about 1 inch larger in both width and height for easy alignment and adhesion. 2. Prepare the frame for tape: Wipe the frame areas (where double-sided tape will go) with a clean, dry cloth to remove dust/debris. Apply the tape along the frameu2019s entire perimeter. Then peel off only the four corners (top-left, top-right, bottom-left, bottom-right) of the tapeu2019s outer lineru2014do not peel off the whole liner. 3. Attach from the top-left corner: Align the filmu2019s top-left corner with the frameu2019s top-left corner (where the tape liner is peeled). Press the film onto the exposed tape. 4. Pull the film taut horizontally to the top-right corner (ensure no wrinkles), then press the film there. Once aligned, peel off the remaining outer liner from the top edgeu2019s tape and press the film firmly to stick fully. 5. Secure the left edge: From the attached top-left corner, pull the film taut vertically down to the frameu2019s bottom-left corner. Check for wrinkles, adjust, then press the film there. Peel off the remaining outer liner from the left edgeu2019s tape and press the film firmly to secure it. 6. Secure the right and bottom edges: Start at the attached bottom-left corner, pull the film taut horizontally to the bottom-right corner. Confirm no wrinkles, then press the film there. Peel off the remaining outer liner from the right and bottom edgesu2019 tape. Press the film firmly along these edges for full adhesion. 7. Trim excess film: Use a utility knife or sharp scissors to cut off excess film beyond the frame. Cut along the frame edge for a neat finish. See more
Product Dimensions (L x W x H)62"L x 42"W (157.5 x 106.7 cm)

PRODUKTBESCHREIBUNG

Window Insulation for Winter, 62''x42''-9PCS Window Insulation Kit, Window Plastic for Winterizing, Clear

Kundenfragen und -antworten

  • Frage: Wie kaufe ich Window Insulation for Winter, 62''x42''-9PCS Window online bei Ubuy ein?

    Antworten: Es ist ganz einfach, Window Insulation for Winter, 62''x42''-9PCS Window online bei Ubuy einzukaufen.. Sie müssen nur nach dem Produkt suchen, beim Bezahlen Ihre Versandart auswählen und es an Ihren Standort liefern lassen.
  • Frage: Ist Window Insulation for Winter, 62''x42''-9PCS Window in Liechtenstein zum Online-Shoppen verfügbar?

    Antworten: Ja, bei Ubuy Liechtenstein können Sie dieses Produkt zu einem angemessenen Preis kaufen.. Das Window Insulation for Winter, 62''x42''-9PCS Window ist lokal nicht verfügbar, aber Sie können uns unseren Expressversandservice anvertrauen.
  • Frage: Wie lange dauert es nach der Bestellung, bis ich das Produkt erhalte?

    Antworten: Die Lieferzeit Ihres bestellten Produkts hängt davon ab, was Sie bestellt haben und welche Versandart Sie gewählt haben.. Die voraussichtliche Lieferzeit wird während des Bestellvorgangs angegeben. Seien Sie also beim Einkaufen unbesorgt.

Wichtige Information

  • Einschränkungen: Für international versandte Produkte beachten Sie bitte, dass jegliche Herstellergarantie nicht gültig sein könnte; Herstellerservice-Optionen nicht verfügbar sein könnten; Produkthandbücher, Gebrauchsanleitungen und Sicherheitshinweise nicht in der Sprache des Ziellandes verfasst sein könnten; die Produkte (und Begleitmaterialien) könnten nicht im Einklang mit den Standards, Spezifizierungen und Etikettierungsvorgaben des Ziellandes entworfen sein; und die Produkte könnten nicht der Voltzahl und anderen elektrischen Standards des Ziellandes entsprechen (weshalb, falls zutreffend, die Verwendung eines Adapters oder Umwandlers erforderlich sein könnte). Der Empfänger ist dafür verantwortlich sicherzustellen, dass das Produkt legal in das Zielland importiert werden kann. Bei der Bestellung von Ubuy oder seinen Partnern ist der Empfänger der eingetragene Importeur und muss sich an alle Gesetze und Regulierungen des Ziellandes halten.
  • Nicht alle auf Ubuy aufgeführten Produkte werden zum Verkauf angeboten, da Ubuy eine globale Suchmaschine ist. Produkte unterliegen Export-/Handelsbestimmungen.